Ives 7237F Instrukcja Użytkownika Pobierz pdf

7230F and 7237F

3/4” Heavy Duty Offset Top Pivot

Improper pivot set installation can lead to personal injury or property damage. Follow

all instructions carefully. For questions contact Technical Support at 1-888-371-7331.

CAUTION

1. Prepare and mortise top of door and head jamb to receive pivot set. Determine pivot location

using dimensions on reverse side. The pivots are non-handed. To determine hand of door

and proper pivot position, see diagrams above.

2. Locate, drill, and tap 1/4-20 mounting holes for metal door or metal frame. Locate and drill

pilot holes for #14 wood screws for wood door or wood frame. Install pivot leafs with 1/4-20 x 3/4”

FHMS or #14 FHWS screws provided.

3. Loosen set screw in pin leaf with 3/32” Allen wrench provided and remove pivot pin.

4. Use 5/32” Allen wrench to remove pivot cap from door leaf, allowing for pivot pin re-insertion.

5. With door in open position (about 90° to jamb), carefully fit door onto bottom pivot at a slight

angle. Tip door into vertical position, aligning top pivot leafs in door and jamb. With pivot

leafs aligned, insert pivot pin into pivot set. Vertically align groove in pivot pin with set

screw in pivot leaf. Tighten set screw securely with 3/32” Allen wrench. Re-install pivot cap.

6. To remove door from jamb: Remove pivot cap. Thread a 1/4-20 machine screw into end of

pivot pin. Pull pivot pin out of pivots. Door can now be removed from opening.

Right hand

installation

Left hand

installation

Pin leaf

Bearing

leaf

Pivot

Pivot cap

5/32” Allen wrench

Bearing leaf

Set screw

3/32” Allen wrench

Pin leaf

1/4-20 tapped hole for

pin removal (both ends)

Installation Instructions

1 2

Installation Instructions 1
26673-00 2

Podsumowanie treści

Strona 1 - Installation Instructions

7230F and 7237F3/4” Heavy Duty Offset Top PivotImproper pivot set installation can lead to personal injury or property damage. Followall instructions

Strona 2 - 26673-00

Right hand installation shown;left hand opposite26673 Rev. 3It is very important for installer to verify that center line of top pivot point lines up

Komentarze do niniejszej Instrukcji

Brak uwag

Ives 7237F Instrukcja Użytkownika

Przeglądaj online lub pobierz Instrukcja Użytkownika dla Zestawy montażowe Ives 7237F. Ives 7237F User's Manual Instrukcja obsługi

Podsumowanie treści

Komentarze do niniejszej Instrukcji